logo.cpp Example File

hellogl2/logo.cpp
 /****************************************************************************
 **
 ** Copyright (C) 2016 The Qt Company Ltd.
 ** Contact: https://www.qt.io/licensing/
 **
 ** This file is part of the examples of the Qt Toolkit.
 **
 ** $QT_BEGIN_LICENSE:BSD$
 ** Commercial License Usage
 ** Licensees holding valid commercial Qt licenses may use this file in
 ** accordance with the commercial license agreement provided with the
 ** Software or, alternatively, in accordance with the terms contained in
 ** a written agreement between you and The Qt Company. For licensing terms
 ** and conditions see https://www.qt.io/terms-conditions. For further
 ** information use the contact form at https://www.qt.io/contact-us.
 **
 ** BSD License Usage
 ** Alternatively, you may use this file under the terms of the BSD license
 ** as follows:
 **
 ** "Redistribution and use in source and binary forms, with or without
 ** modification, are permitted provided that the following conditions are
 ** met:
 **   * Redistributions of source code must retain the above copyright
 **     notice, this list of conditions and the following disclaimer.
 **   * Redistributions in binary form must reproduce the above copyright
 **     notice, this list of conditions and the following disclaimer in
 **     the documentation and/or other materials provided with the
 **     distribution.
 **   * Neither the name of The Qt Company Ltd nor the names of its
 **     contributors may be used to endorse or promote products derived
 **     from this software without specific prior written permission.
 **
 **
 ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
 **
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/

 #include "logo.h"
 #include <qmath.h>

 Logo::Logo()
     : m_count(0)
 {
     m_data.resize(2500 * 6);

     const GLfloat x1 = +0.06f;
     const GLfloat y1 = -0.14f;
     const GLfloat x2 = +0.14f;
     const GLfloat y2 = -0.06f;
     const GLfloat x3 = +0.08f;
     const GLfloat y3 = +0.00f;
     const GLfloat x4 = +0.30f;
     const GLfloat y4 = +0.22f;

     quad(x1, y1, x2, y2, y2, x2, y1, x1);
     quad(x3, y3, x4, y4, y4, x4, y3, x3);

     extrude(x1, y1, x2, y2);
     extrude(x2, y2, y2, x2);
     extrude(y2, x2, y1, x1);
     extrude(y1, x1, x1, y1);
     extrude(x3, y3, x4, y4);
     extrude(x4, y4, y4, x4);
     extrude(y4, x4, y3, x3);

     const int NumSectors = 100;

     for (int i = 0; i < NumSectors; ++i) {
         GLfloat angle = (i * 2 * M_PI) / NumSectors;
         GLfloat angleSin = qSin(angle);
         GLfloat angleCos = qCos(angle);
         const GLfloat x5 = 0.30f * angleSin;
         const GLfloat y5 = 0.30f * angleCos;
         const GLfloat x6 = 0.20f * angleSin;
         const GLfloat y6 = 0.20f * angleCos;

         angle = ((i + 1) * 2 * M_PI) / NumSectors;
         angleSin = qSin(angle);
         angleCos = qCos(angle);
         const GLfloat x7 = 0.20f * angleSin;
         const GLfloat y7 = 0.20f * angleCos;
         const GLfloat x8 = 0.30f * angleSin;
         const GLfloat y8 = 0.30f * angleCos;

         quad(x5, y5, x6, y6, x7, y7, x8, y8);

         extrude(x6, y6, x7, y7);
         extrude(x8, y8, x5, y5);
     }
 }

 void Logo::add(const QVector3D &v, const QVector3D &n)
 {
     GLfloat *p = m_data.data() + m_count;
     *p++ = v.x();
     *p++ = v.y();
     *p++ = v.z();
     *p++ = n.x();
     *p++ = n.y();
     *p++ = n.z();
     m_count += 6;
 }

 void Logo::quad(GLfloat x1, GLfloat y1, GLfloat x2, GLfloat y2, GLfloat x3, GLfloat y3, GLfloat x4, GLfloat y4)
 {
     QVector3D n = QVector3D::normal(QVector3D(x4 - x1, y4 - y1, 0.0f), QVector3D(x2 - x1, y2 - y1, 0.0f));

     add(QVector3D(x1, y1, -0.05f), n);
     add(QVector3D(x4, y4, -0.05f), n);
     add(QVector3D(x2, y2, -0.05f), n);

     add(QVector3D(x3, y3, -0.05f), n);
     add(QVector3D(x2, y2, -0.05f), n);
     add(QVector3D(x4, y4, -0.05f), n);

     n = QVector3D::normal(QVector3D(x1 - x4, y1 - y4, 0.0f), QVector3D(x2 - x4, y2 - y4, 0.0f));

     add(QVector3D(x4, y4, 0.05f), n);
     add(QVector3D(x1, y1, 0.05f), n);
     add(QVector3D(x2, y2, 0.05f), n);

     add(QVector3D(x2, y2, 0.05f), n);
     add(QVector3D(x3, y3, 0.05f), n);
     add(QVector3D(x4, y4, 0.05f), n);
 }

 void Logo::extrude(GLfloat x1, GLfloat y1, GLfloat x2, GLfloat y2)
 {
     QVector3D n = QVector3D::normal(QVector3D(0.0f, 0.0f, -0.1f), QVector3D(x2 - x1, y2 - y1, 0.0f));

     add(QVector3D(x1, y1, +0.05f), n);
     add(QVector3D(x1, y1, -0.05f), n);
     add(QVector3D(x2, y2, +0.05f), n);

     add(QVector3D(x2, y2, -0.05f), n);
     add(QVector3D(x2, y2, +0.05f), n);
     add(QVector3D(x1, y1, -0.05f), n);
 }